The Gillette Pepsi-Cola Companies can provide up-to-date equipment to accommodate any beverage retailers hot or cold beverage needs. Coin operated bottle and can vendors, bar systems and restaurant fountain systems are our specialty. Our well trained staff can help with all aspects of beverage dispensing, including initial system design, installation and, of course, service.
If you’re interested in improving your beverage sales with the installation of equipment or to upgrade your existing equipment, contact your local Pepsi-Cola representative or visit our contact us page. Call the appropriate Gillette Pepsi-Cola Companies division and we’ll connect you with a representative who will work with you and your individual needs.
1-877-606-4313
For equipment repairs, call our toll free automated system. Refer to the equipment number listed on the Pepsi Repair Hotline tag attached to your equipment.
This is a local repair hotline number for the Gillette Pepsi-Cola Companies. We service southern Minnesota, northeast Iowa and southwest Wisconsin. If you are located outside of these areas please contact your local Pepsi representative.
Before calling the Pepsi Repair Hotline there are a few trouble shooting checks you should try:
For vending machines:
1. Verify that there is electrical power to the outlet and the circuit breaker is not blown.
2. Verify that the machine is completely plugged into the outlet.
3. Push all selection buttons.
4. After performing the checks above, deposit money in the machine to see if it works properly.
5. If these steps do not resolve the problem, call the repair hotline and refer to the equipment number on your machine.
For fountain machines:
1. Verify that there is electrical power to the outlet and the circuit breaker is not blown.
2. Verify that the machine is completely plugged into the outlet.
3. Verify that the CO2 tank guage is not in the red and the valve is open.
4. If you have changed the CO2 cylinder, run the valve until bubbles appear.
5. Verify that you are not out of product.
6. If these steps do not resolve the problem, call the repair hotline and refer to the equipment number on your machine.
For glass door coolers:
1. Verify that there is electrical power to the outlet and the circuit breaker is not blown.
2. Verify that the machine is completely plugged into the outlet.
3. If these steps do not resolve the problem, call the repair hotline and refer to the equipment number on your machine.
For hot beverage equipment:
1. Verify that there is electrical power to the outlet and the circuit breaker is not blown.
2. Verify that the machine is completely plugged into the outlet.
3. Verify that the master power switch is in the ON position.
3. If these steps do not resolve the problem, call the repair hotline and refer to the equipment number on your machine.
